PSP Firmware 6.31 Out Now. With Sony now making version 6.31 of the system’s software available. And it should be available via the direct download links on the official PlayStation sites. Find download links for PSP Official Firmware below. Sony OFW 6.60 For PSP 1000/2000/3000: Download from playstation.org (direct link) Sony OFW 6.60 For PSP Go: Download from free.fr (direct link) Sony OFW 6.60 For PSP 1000/2000/3000: Download from wololo.net (direct link) (Some additional links are pending review for this version).
PSP Firmware Crack Update 6.61 Full Keygen Version Free Download
PSP Firmware 6.61-Pro-C2 will work on all PSP models. Whether original PSP to the PSP Go and even the E1000, all you need is to be running the official 6.60 or 6.61 firmware. The user needs to install and use this custom firmware.
Note: On the 15/01/2015 Sony released PSP firmware 6.61, some three and a half years after the last 6.60 updates. It’s of no benefit to you updating to 6.61 after all this time, however, the custom firmware has now been updated to support 6.61. So you can now follow this guide if you happen to have updated to 6.61 Workplace tech tool manual pdf.
Why would I want to install Custom Firmware on my PSP?
When custom firmware is on your PSP you can use emulators, homebrew applications and even back up your games to the memory stick. This allows you to easily carry around more than one game. It helps to save your PSP’s battery as it does not need to power the UMD drive when playing games. You can also convert your old PS1 games and play them your PSP. All PS1 games are supported, not just games on the PSN. You can also add new features to your PSP via kernel mode background plugins, for example, the ability to take screenshots in games.
Something to note is that you can only permanently install this firmware on a PSP 1000 or a PSP 2000. That is not an 88 v3 version. However its very easy to reload the custom firmware on an 88V3 PSP 2000, PSP 3000, PSP Go or E1000. I will cover finding out your PSP version later in this guide, all you need to know for now is that if you own a PSP you can follow this guide and get homebrew applications running on your PSP.
Psp Ofw 6.31 Download Windows 7
To begun Download the Official PSP 6.60 firmware and update your PSP.
To update the PSP simply extract the PSP folder from the 6.61 update RAR file and move it to your PSP’s memory stick.
As you can see below the PSPGAMEUPDATE folder contains the EBOOT.PBP update.
Now on your PSP go to the Game > Memory stick then launch the 6.61 updates. The user has followed the instructions to install the update:
2. Installing the custom firmware:
Now Download the PSP 6.60 PRO-C2 custom firmware if you are on 6.00
If you are on 6.61 Download the PSP 6.61 PRO-C2 custom firmware.
Inside this RAR file you will find 3x folders that you need:
Installing custom firmware (CFW) on your Sony PSP can unlock the power to use it as a capable handheld emulation platform, as well as opening it up to playing your PS1 backup files. If you’re not familiar with CFW on the PSP, you may be surprised at how easy it is to set up and use.
Please pay special attention to the text in red, follow the instructions carefully and in order, and you should have no problems.
Is my PSP compatible?
There have been several iterations of the PSP hardware over the years, and there are some differences in what kind of CFW you can get running on each. Clicking the picture will take you to an excellent resource listing all the different motherboard revisions and what CFW they are compatible with.
In a nutshell, every single PSP ever made can run some form of the latest CFW, and all but the E1000 (Street) model support a permanent form of the CFW that persists even when the console is completely shut down or has its battery removed. The permanent patch takes two forms: either the cIPL flasher that comes with the CFW, or the Infinity 6.61 patch (which is bit more involved but provides the same functionality). I’ll run through both methods in this tutorial.
TutorialPsp Ofw 6.31 Download Free
Updating your OFW
First check which version of the official firmware (OFW) your PSP is currently running by going into your Settings menu, then System Settings / System Information. If you’re on a version older than 6.60 then you must perform this update, otherwise skip this step.
If you have a new memory card, please format it first by putting it into your PSP, then choose Format Memory Card from the System Settings menu. This will wipe it clean, change it to the correct file system, and set up the default folder directories.
The latest OFW from Sony is 6.61 (as of March 2016), but we will update only to 6.60 as (apparently) the CFW for 6.60 has better compatibility with homebrew applications and themes. Download OFW 6.60 here and extract it onto the root of your memory card, choose to merge the folders if necessary and you should end up with an EBOOT.PBP file under PSPGAMEUPDATE. Run the 6.60 updater from your PSP and let it do its work.
Installing the CFW
If you are now running OFW 6.60 then download this CFW folder, if you were already on OFW 6.61 then download this folder instead. Inside the package are three folders:
Regardless of which hardware revision you have, go ahead and copy the PROUPDATE into the PSPGAME directory on your memory card. You’ll now see a ProUpdate application in your PSP, run it and allow it to complete the installation. Your PSP is now running the temporary CFW which lasts until a power off (sleep mode doesn’t count as powering off). You can delete the PROUPDATE folder from your memory card now.
It’s worth pointing out that you can stop here if you like. Simply copy the FastRecovery folder into your PSPGAME directory and run that application every time you boot up your PSP from a fully powered down state to reinstate the CFW – it doesn’t take long and most people will be happy with this solution (it’s also the only solution open to owners of the E1000 hardware revision). But if you want a permanent hack that doesn’t require the FastRecovery app, then read on.
Upgrading to Permanent CFW
If you have a PSP-1000 or 2000, then go to Method 1 (and then check if you need to use Method 2). If you have a PSP-3000 or Go, then go to Method 2. If you have a PSP Street then this you are out of luck for now, you have to stick with the temporary CFW and the FastRecovery app.
Method 1
If you have a PSP-2000 please first download PSPIdent, extract the PSPIdent folder to your PSPGAME directory, and run it. It will tell you which motherboard revision you have. If you are unlucky and have the TA-088v3 then this method will not work! You will have to use method 2. Otherwise, you’re good to go with this method.
Copy the CIPL_Flasher folder from the CFW download into your PSPGAME folder and run the application. That’s it. Now you can turn your PSP off whenever you want and the CFW will still be intact next time you power it back on again. Easy! You can now delete the CIPL_Flasher folder from your memory card.
Method 2
What causes serial cheaters. Save what sanity you have left - get out and be free. They targeted us - like predatory rattlesnakes. You cannot fix them - they don't think there is anything wrong with them.
OK this is a bit more involved than Method 1, but it is the only method available to owners of the PSP-3000, Go, and the PSP-2000 with a TA-088v3 motherboard.
We will be using Davee’s 6.61 Infinity to enable a permanent CFW hack on our machine. Download the Infinity installer from Davee’s website, as well as the 6.31 and 6.61 OFW from the relevant links below based on your hardware:
It is critically important you choose the correct OFW versions for your PSP, you will brick it otherwise.
Unzip the Infinity files and you will find two folders called FLASHER and MAKER inside – copy these to the PSPGAME folder on your memory card. Next, unpack the 6.31 and 6.61 OFW files you downloaded and rename the EBOOT file for each one to 631.PBP and 661.PBP respectively. Then copy these two files into the MAKER folder on your memory card.
Run the Maker application from your PSP and allow it to work. You will now have a file in the MAKER folder called DATA.MFC, copy this file into the FLASHER folder on your memory card and now run the Flasher application from your PSP. After it’s done you will be running 6.61 Infinity.
You are technically still running the OFW at this stage, just a compromised version of it, so now you’ll need to reinstall the CFW just as you did in the Installing the CFW section – but this time install the 6.61 version, even if you installed the 6.60 version before!
Psp Ofw 6.60 Download
Once that’s installed download the Infinity Configuration folder from Davee’s website, then unpack and copy the files within into your PSPGAME folder. run the Configuration application from your PSP and scroll across to the Installed Modules page. Choose the PRO CFW option to make your CFW permanent. You are now safe to power down your PSP totally without needed to reinstate the CFW on reboot.
Once you’re up and running with the CFW you play ISO backups of your PSP games and converted backups of your old PS1 games (among many other things!). PSP ISO files go into the ISO folder in the root of your memory card (if this folder doesn’t exist then create it yourself, just ensure that ISO is spelled in all-caps), PS1 games go into the PSP/GAME folder (you can put them into their own sub-folders within the GAME folder itself).
Psp Official Firmware 6.31 Download
–Jaska–
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |